Dělící jednotka IE-MiniFiberLinxII/Telco/LastGasp

Obdobná jednotka jako je FiberLinx-II

IE-MiniFiberLinX/Telco jsou navrženy pro nasazení s -48VDC napájením podle Bellcore GR-499 specifikace typické pro Telco aplikace. Jednotky nepodporují PoE napájení. Dodatečné funkce LastGap a Trap notification pro identifikaci problému s napájením

Funkce a specifikace:

• General
  • Preserves complete end-to-end fiber connection integrity
  • Bi-directional bandwidth control (per port, per direction, per VLAN)
  • Read/write IEEE 802.1Q VLAN-tags
  • Extra Tagging with Q-in-Q mode (802.1p)
  • Supports passive 802.3ah OAM (Operation, Administration & Management)
  • QoS: IEEE 802.1p-based packet prioritization (2 queues [high/low] with 8 levels of priority)
  • VLAN filtering up to 32 values
  • Layer 2 packet switching, store and forward operation
  • Forwarding rate: 14,881 pps for 10 Mbps; 148,810 pps for 100 Mbps
  • AutoCross for MDI/MDIX
  • Features Auto Negotiation and Selective Advertising
  • Supports Half and Full-Duplex operation
  • MTU: Supports over-sized packets up to 1916 bytes per packet
• Security
  • Password Control
  • Multiple Access Levels: User Assigned Accounts & Access Levels
• Management
  • SNMP V1 and V2c compatible
  • Includes GUI-based iView² software for remote management and upgrades
  • Monitors far-end (remote) status without a physical presence or separate connection
  • IEEE 802.3x Flow Control
  • Includes DHCP and TFTP clients
  • Supports Telnet
  • Includes loopback test modes (MAC swap)
  • Includes LinkLoss and FiberAlert
  • Remote capabilities with built-in support for UMA (IP-less management)
  • RS-232 (Craft) interface for local management
  • Serial cable for direct connection to a PC’s Serial Port
• Ethernet Types Supported
  • IEEE 802.3i 10Base-T twisted pair
  • IEEE 802.3u 100Base-TX twisted pair
  • IEEE 802.3u 100Base-FX or SX fiber
• Mechanical
  • Dimensions 0.83”H x 1.80”W x 3.35”D (2.11 x 4.57 x 8.51 cm)
• Power
  • AC Wall Adapter: 100 to 240 VAC ±10% input, 5 VDC output, 2A max.
  • DC Input Voltage: 12 to 48 VDC *, 1 to .02A, 7 to 50 VDC, 1 to 0.1A
• Environmental
  • Operating Temperature:
    -49° to +185° F (-45° to +85° C) DC Telco
    -13° to +167° F (-25° to +75° C) DC Adapter
    +14° to +122° F (-10° to +50° C) AC Adapter
  • Storage Temperature -49° to +185° F (-45° to +85° C)
  • Operating Humidity 5 to 95% Non-condensing
• Regulatory Aprovals
  • FCC Class A
  • UL/cUL, CE, CSA, CB

Informace pro objednávku

Model	Fiber	Fiber Ports	Range	Ethernet Ports	Ethernet Connector
iMcV-FiberLinX-II/LastGasp TX/SFP
856-17720	MM850-ST	1	2 km	1	RJ45
856-17721	MM850-SC	1	2 km	1	RJ45
856-17722	MM1300-ST	1	5 km	1	RJ45
856-17723	MM1300-SC	1	5 km	1	RJ45
856-17724	SM1310-SC	1	10 km	1	RJ45
856-17726	SM1310/PLUS-ST	1	30 km	1	RJ45
856-17727	SM1310/PLUS-SC	1	30 km	1	RJ45
856-17728	SM1310/LONG-ST	1	80 km	1	RJ45
856-17729	SM1310/LONG-SC	1	80 km	1	RJ45
856-17730	SM1310/XLONG-SC	1	100 km	1	RJ45
856-17731	SM1550/LONG-SC	1	80 km	1	RJ45
856-17732	SM1550/XLONG-SC	1	100 km	1	RJ45
Single Strand Fiber*
856-17740	SSFX-MM1310-SC	1	2 km	1	RJ45
856-17741	SSFX-MM1550-SC	1	2 km	1	RJ45
856-17742	SSFX-SM1310-SC	1	20 km	1	RJ45
856-17743	SSFX-SM1550-SC	1	20 km	1	RJ45
856-17744	SSFX-SM1310/PLUS-SC	1	40 km	1	RJ45
856-17745	SSFX-SM1550/PLUS-SC	1	40 km	1	RJ45
856-17746	SSFX-SM1310/LONG-SC	1	60 km	1	RJ45
856-17747	SSFX-SM1550/LONG-SC	1	60 km	1	RJ45

* These products have single-strand fiber technology. Deploy in pairs or connect another compatible B&B IMC LLC single-strand fiber product.